Anritsu MS2026C - Upper Limit X Value (Continued)

:CALCulate:LIMit Subsystem VNA Commands
3-48 PN: 10580-00306 Rev. E MS20xxC PM
Upper Limit X Value (continued)
Example: To move the trace 4 upper limit to 5000 Hertz (trace 4 in frequency
domain):
:CALCulate4:LIMit:UPPer:X 5000
OR to 500 MHz:
:CALCulate4:LIMit:UPPer:X 500 MHz
To move the trace 1 upper limit to 5 feet (trace 1 in distance domain
with current distance unit in meter):
:CALCulate:LIMit:UPPer:X 5 FT
OR to 4 Meter
:CALCulate1:LIMit:UPPer:X 4 M
:CALCulate:LIMit:UPPer:X 4
To set the trace 2 upper limit point to 2.5 nanoseconds (trace 2 in time
domain):
:CALCulate2:LIMit:UPPer:X 2.5
:CALCulate2:LIMit:UPPer:X 2.5 ns
To set the trace 3 upper limit point to 25 microseconds (trace 3 in time
domain):
:CALCulate3:LIMit:UPPer:X 25 µs
Related Command: :CALCulate:LIMit:TYPe
:CALCulate<Tr>:LIMit:UPPer:Y
[:SENSe]:TRACe<Tr>:DOMain
[:SENSe]:TRACe<Tr>:SELect
Front Panel
Access: Shift 6 (Limit), Limit Edit, Limit X