Anritsu MS2026C - Delta Marker to Span; Delta Marker State

Spectrum Analyzer Commands :CALCulate Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 6-23
Delta Marker to Span
:CALCulate:MARKer{1|2|3|4|5|6}:DELTa[:SET]:SPAN
Description: Sets the total span width to the value of the specified delta marker.
Note that this command is valid only if delta marker is on.
Syntax: :CALCulate:MARKer{1|2|3|4|5|6}:DELTa[:SET]:SPAN
Example: To set the span to the value of delta marker #4:
:CALCulate:MARKer4:DELTa:SPAN
Front Panel
Access: Marker, More Peak Options, Delta Marker to Span
Delta Marker State
:CALCulate:MARKer{1|2|3|4|5|6}:DELTa[:STATe]
Description: Sets the specified delta marker on or off.
Syntax: :CALCulate:MARKer{1|2|3|4|5|6}:DELTa[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}:DELTa[:STATe]?
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <bNR1> 0|1
Default Value: OFF
Example: To turn on delta marker #3:
:CALCulate:MARKer3:DELTa ON
:CALCulate:MARKer3:DELTa 1
:CALCulate:MARKer3:DELTa:STATe ON
:CALCulate:MARKer3:DELTa:STATe 1
To turn off delta marker #6
:CALCulate:MARKer6:DELTa OFF
:CALCulate:MARKer6:DELTa:STATe OFF
:CALCulate:MARKer6:DELTa:STATe 0
Front Panel
Access: Marker, Delta