VNA Commands :CALCulate:TRANsform Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-71
Distance Domain Window Shape
:CALCulate:TRANsform:DISTance:WINDow
Description: Sets the distance domain window shape (used for pre-processing the
frequency domain data) for all traces. Setting the window to
RECTangular sets the window shape to rectangular. Setting the
window to NSL sets the window shape to Nominal Side Lobe view.
Setting the window to LSL sets the window shape to Low Side Lobe
view. Setting the window to MSL sets the window shape to Minimum
Side Lobe.
This command performs the same function as the command
:CALCulate:TRANsform:TIME:WINDow. Either command changes
the window shape for both the time and distance domain traces.
The query version of this command returns RECT for Rectangular
view, NSL for Nominal Side Lobe, LSL for Low Side Lobe, and MSL
for Minimum Side Lobe view.
Syntax: :CALCulate:TRANsform:DISTance:WINDow
RECTangular|NSL||LSL|MSL
:CALCulate:TRANsform:DISTance:WINDow?
Cmd Parameter: <char> RECTangular|NSL||LSL|MSL
Query Response: <char> RECT|NSL||LSL|MSL
Default Value: NSL
Example: To set the window to rectangular:
:CALC:TRAN:DIST:WIND RECT
OR:
:CALCulate:TRANsform:DISTance:WINDow RECTangular
Related Command: :CALCulate:TRANsform:TIME:WINDow
Front Panel
Access: Freq/Time/Distance, Windowing
To Next Page
Loading...
