VNA Commands :CALCulate:MARKer Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-61
Marker Type
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:TYPE
Description: Sets the specified marker to the given marker type and makes it the
active marker. If set to REF, then the specified marker is turned on and
is set as reference marker. If set to DELT, then the specified marker is
turned on and is set as a delta marker. If set to OFF, then the specified
marker is turned off. The query version of this command returns the
string “REF” if the specified marker is set as reference marker, “DELT”
if set as delta marker, or “OFF” if the specified marker is currently set
to off.
Syntax: :CALCulate:MARKer[1]|2|3|4|5|6|7|8:TYPE
REFerence|DELTa|OFF
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:TYPE?
Cmd Parameter: <char> REFerence|DELTa|OFF
Query Response: <char> REF|DELT|OFF
Default Value: OFF
Example: To set marker #1 as the reference marker and turn it on:
:CALCulate:MARKer1:TYPE REFerence
:CALCulate:MARKer:TYPE REF
Front Panel
Access: Marker, Marker Type
To Next Page
Loading...
