Anritsu MS2026C - Start Frequency; Frequency Step

[:SENSe] Subsystem Spectrum Analyzer Commands
6-82 PN: 10580-00306 Rev. E MS20xxC PM
Start Frequency
[:SENSe]:FREQuency:STARt
Description: Sets the start frequency. Note that in the spectrum analyzer, changing
the value of the start frequency changes the value of the coupled
parameters, Center Frequency and Span.
Syntax: [:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
Cmd Parameter: <freq>
Query Response: <freq>
Range: 0 Hz to 9 GHz for MS2036C
0 Hz to 15 GHz for MS2037C
0 Hz to 20 GHz for MS2038C
Default Value: 0 Hz
Default Unit: Hz
Related Command: [:SENSe]:FREQuency:STOP?
Front Panel
Access: Freq, Start Freq
Frequency Step
[:SENSe]:FREQuency:STEP[:INCRement]
Description: Sets the frequency step to the given frequency value.
Syntax: [:SENSe]:FREQuency:STEP[:INCRement] <freq>
[:SENSe]:FREQuency:STEP[:INCRement]?
Cmd Parameter: <freq>
Query Response: <freq>
Range: 1 Hz to 9 GHz for MS2036C
1 Hz to 15 GHz for MS2037C
1 Hz to 20 GHz for MS2038C
Default Value: 1MHz
Default Unit: Hz
Front Panel
Access: Freq, Freq Step