Anritsu MS2026C - Marker X Value (Continued)

VNA Commands :CALCulate:MARKer Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-63
Marker X Value (continued)
Example: To set reference marker #2 (frequency domain) to 5000 hertz on the
x-axis:
:CALCulate:MARKer2:X 5000
:CALCulate:MARKer2:X 5000Hz
To set reference marker #1 to 1.5 GHz on the x-axis:
:CALCulate:MARKer1:X 1.5GHz
:CALCulate:MARKer1:X 1.5GHz
To set reference marker #3 (time domain) to 1.5 nanoseconds on the
x-axis:
:CALCulate:MARKer3:X 1.5ns
To set reference marker #1 (time domain) to 25 us:
:CALCulate:MARKer1:X 25us
Related Command: :CALCulate:MARKer#:DOMain?
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:Y?
Front Panel
Access: Marker, [Marker 1/2/3/4/5/6/7/8]