Anritsu MS2026C - Lower Limit X Value (Continued)

:CALCulate:LIMit Subsystem VNA Commands
3-32 PN: 10580-00306 Rev. E MS20xxC PM
Lower Limit X Value (continued)
Example: To move the trace 4 lower limit to 5000 Hertz (trace 4 in frequency
domain)
:CALCulate4:LIMit:LOWer:X 5000
OR to 500 MHz:
:CALCulate4:LIMit:LOWer:X 500 MHz
To move the trace 1 lower limit to 5 Feet (trace 1 in distance domain
with current distance unit in meter)
:CALCulate:LIMit:LOWer:X 5 FT
OR to 4 Meter
:CALCulate1:LIMit:LOWer:X 4 M
:CALCulate:LIMit:LOWer:X 4
To set the trace 2 lower limit point to 2.5 nanoseconds (trace 2 in time
domain)
:CALCulate2:LIMit:LOWer:X 2.5 ns
To set the trace 3 lower limit point to 25 microseconds (trace 3 in time
domain)
:CALCulate3:LIMit:LOWer:X 25 µs
Related Command: :CALCulate:LIMit[:STATe]
:CALCulate<Tr>:LIMit:LOWer:Y
Front Panel
Access: Shift 6 (Limit), Limit Edit, Limit X