Anritsu MS2026C - Lower Limit State

:CALCulate Subsystem Spectrum Analyzer Commands
6-8 PN: 10580-00306 Rev. E MS20xxC PM
Lower Limit State
:CALCulate:LIMit:LOWer[:STATe]
Description: Turns the lower limit line ON or OFF. It is a combination of the
commands :CALCulate:LIMit:TYPe 1;
:CALCulate:LIMit:STATe ON|OFF. The query version of the
command returns a 1 if the lower limit line is ON and returns a 0 if
OFF.
Syntax: :CALCulate:LIMit:LOWer[:STATe] OFF|ON|0|1
:CALCulate:LIMit:LOWer[:STATe]?
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <bNR1> 0|1
Default Value: OFF
Example: To turn on lower limit:
:CALCulate:LIMit:LOWer ON
:CALCulate:LIMit:LOWer 1
:CALCulate:LIMit:LOWer:STATe ON
To turn off lower limit:
:CALCulate:LIMit:LOWer OFF
:CALCulate:LIMit:LOWer 0
:CALCulate:LIMit:LOWer:STATe 0
Related Command: :CALCulate:LIMit:ALARm
Front Panel
Access: Shift-6 (Limit), On/Off