Anritsu MS2026C - Distance Units

:CALCulate:TRANsform Subsystem VNA Commands
3-70 PN: 10580-00306 Rev. E MS20xxC PM
Distance Units
:CALCulate:TRANsform:DISTance:UNIT
Description: Sets the units to be used for DTF measurements. The query version of
this command returns the string “METER” if the current distance unit
is set to meter, and otherwise returns the string “FEET”.
Syntax: :CALCulate:TRANsform:DISTance:UNIT METers|FEET
:CALCulate:TRANsform:DISTance:UNIT?
Cmd Parameter: <char> METers|FEET
Query Response: <char> METER|FEET
Default Value: METers when setting, METER for query
Example: To set the distance unit to Meter:
:CALCulate:TRANsform:DISTance:UNIT METers
:CALC:TRAN:DIST:UNIT MET
To set the distance unit to Feet:
:CALC:TRAN:DIST:UNIT FEET
:CALCulate:TRANsform:DISTance:UNIT FEET
Front Panel
Access: Shift 8 (System), Application Options, Units