Anritsu MS2026C - Next Point Left; Next Point Right

VNA Commands :CALCulate:LIMit Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-35
Next Point Left
:CALCulate:LIMit:POINt:LEFT
Description: Sets the limit point immediately to the left of the active limit point as
the active point. This makes it active for editing or deleting. Use
:CALCulate:LIMit:TYPE to set the currently active limit line.
Syntax: :CALCulate:LIMit:POINt:LEFT
Cmd Parameter: NA
Query Response: NA (no query)
Example: To select the point to the left of the active point
:CALCulate:LIMit:POINt:LEFT
Related Command: :CALCulate:LIMit:POINt:RIGHt
Front Panel
Access: Shift 6 (Limit), Limit Edit, Next Point Left
Next Point Right
:CALCulate:LIMit:POINt:RIGHt
Description: Sets the limit point immediately to the right of the active limit point as
the active point. This makes it active for editing or deleting. Use
:CALCulate:LIMit:TYPE to set the currently active limit line.
Syntax: :CALCulate:LIMit:POINt:RIGHt
Cmd Parameter: NA
Query Response: NA (no query)
Example: To select the point to the right of the active point:
:CALCulate:LIMit:POINt:RIGHt
Related Command: :CALCulate:LIMit:POINt:LEFT
Front Panel
Access: Shift 6 (Limit), Limit Edit, Next Point Right