VNA Commands :MMEMory:STORe Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-99
3-18 :MMEMory:STORe Subsystem
The Mass MEMory STORe subsystem contains commands to transfer from the internal
memory to the mass memory device.
Save Setup
:MMEMory:STORe:STATe
Description: Stores the current setup into the file that is specified by
<file name>. <file name> must be enclosed in either single quotes
(‘ ’) or double quotes (“ ”) and must not contain a file extension. The
<integer> is used to distinguish whether the calibration should be
saving with the setup. Send a 1 to save setup without a calibration.
Send a 2 to save setup with calibration.
Syntax: :MMEMory:STORe:STATe <integer>,<file name>
Cmd Parameter: <integer>,<string> (1|2, filename)
Query Response: NA (no query)
Front Panel
Access: Shift-7 (File), Save, Change Type (select Setup from list)
To Next Page
Loading...
