General Information Remote Programming Setup and Interface
MS20xxC PM PN: 10580-00306 Rev. E 1-7
USB Interface, Type Mini-B
The USB 2.0 Mini-B device connector can be used to connect the MS20xxC directly to a
PC. The first time that the MS20xxC is connected to a PC, the normal USB device
detection is performed by the computer operating system. The CD-ROM that is shipped
with the instrument contains a driver for Windows 2000, Windows XP, and
Windows Vista. The driver is installed when Master Software Tools is installed.
Drivers are not available for earlier versions of the Windows operating system. During
the driver installation process, place the CD-ROM in the computer drive and specify
that the installation wizard should search the CD-ROM for the driver.
To Next Page
Loading...
