Anritsu MS2026C - Limit Point X Value (Continued)

VNA Commands :CALCulate:LIMit Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-37
Limit Point X Value (continued)
Example: To set the active limit point to 5000 Hertz (active trace in frequency
domain):
:CALCulate:LIMit:POINt:X 5000
OR to 500 MHz:
:CALCulate:LIMit:POINt:X 500 MHz
To set the active limit point to 5 Feet (active trace in distance domain
with current distance unit in meter):
:CALCulate:LIMit:POINt:X 5 FT
OR to 4 Meter
:CALCulate:LIMit:POINt:X 4 M
:CALCulate:LIMit:POINt:X 4
To set the active limit point to 2.5 nanoseconds (active trace in time
domain):
:CALCulate:LIMit:POINt:X 2.5
:CALCulate:LIMit:POINt:X 2.5 ns
To set the active limit point to 25 us (active trace in time domain):
:CALCulate:LIMit:POINt:X 25 us
Related Command: :CALCulate:LIMit:POINt:Y
:CALCulate:LIMit:TYPE
[:SENSe]:TRACe<Tr>:DOMain
[:SENSe]:TRACe<Tr>:SELect
Front Panel
Access: Shift 6 (Limit), Limit Edit, Limit X