Anritsu MS2026C - Start Time; Stop Time

VNA Commands :CALCulate:TRANsform Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-73
Start Time
:CALCulate:TRANsform:TIME:STARt
Description: Sets the start time. The query version returns the current start time in
nanoseconds.
Syntax: :CALCulate:TRANsform:TIME:STARt
:CALCulate:TRANsform:TIME:STARt?
Cmd Parameter: <NRf> seconds
Query Response: <NR3> nanoseconds
Range: –100 ms to +100 ms
Default Value: 0ps
Default Unit: Seconds (s) when setting, nanoseconds (ns) for query
Example: To set the start time to 10 microseconds:
:CALC:TRAN:TIME:STAR 10us
To set the start time to 20 nanoseconds:
:CALCulate:TRANsform:TIME:STARt 20ns
Front Panel
Access: Freq/Time/Dist, Start Time
Stop Time
:CALCulate:TRANsform:TIME:STOP
Description: Sets the stop time. The query version returns the current stop time in
nanoseconds.
Syntax: :CALCulate:TRANsform:TIME:STOP
:CALCulate:TRANsform:TIME:STOP?
Cmd Parameter: <NRf> seconds
Query Response: <NR3> nanoseconds
Range: –100 ms to +100 ms
Default Value: 20 ns
Default Unit: Seconds (s) when setting, nanoseconds (ns) for query
Front Panel
Access: Freq/Time/Dist, Stop Time