:CALCulate Subsystem Spectrum Analyzer Commands
6-18 PN: 10580-00306 Rev. E MS20xxC PM
Limit State
:CALCulate:LIMit[:STATe]
Description: Turns the currently selected limit line (upper or lower) ON or OFF. If
the value is set to ON or 1, then the currently selected limit line is ON.
If the value is set to OFF or 0, then the currently selected limit line
is OFF. The query version of the command returns a 1 if the currently
selected limit line is ON and returns a 0 if OFF. Use
:CALCulate:LIMit:TYPe to set the currently active limit line.
Syntax: :CALCulate:LIMit[:STATe] OFF|ON|0|1
:CALCulate:LIMit[:STATe]?
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <bNR1> 0|1
Default Value: OFF
Example: To turn on the currently selected limit line:
:CALCulate:LIMit ON
:CALCulate:LIMit:STATe ON
:CALCulate:LIMit:STATe 1
To turn off the currently selected limit line:
:CALCulate:LIMit OFF
:CALCulate:LIMit:STATe 0
:CALCulate:LIMit 0
Front Panel
Access: Shift-6 (Limit), On/Off
Turn All Markers Off
:CALCulate:MARKer:AOFF
Description: Turns off all markers.
Syntax: :CALCulate:MARKer:AOFF
Front Panel
Access: Marker, More, All Markers Off
To Next Page
Loading...
