All Mode Commands [:SENSe]:GPS Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 8-11
8-8 [:SENSe]:GPS Subsystem
This subsystem contains commands that relate to the optional GPS (Global Positioning
System) on the instrument.
GPS On/Off
[:SENSe]:GPS
Description: Enables/disables optional GPS capability. The query version returns 0
when the GPS is Off and returns 1 when the GPS is On.
Requires Option 31.
Syntax: [:SENSe]:GPS OFF|ON|0|1
[:SENSe]:GPS?
Cmd Parameters: <boolean> OFF|ON|0|1
Query Responses: <bNR1> 0|1
Default Value: Off
Front Panel
Access: Shift 8 (System), GPS, GPS On/Off
GPS Reset
[:SENSe]:GPS:RESet
Description: Resets optional GPS receiver.
Requires Option 31.
Syntax: [:SENSe]:GPS:RESet
Cmd Parameters: NA
Query Responses: NA (no query)
Front Panel
Access: Shift 8 (System), GPS, Reset
GPS Antenna Current
[:SENSe]:GPS:CURRent?
Description: Query only. Reads the current draw of the GPS antenna in mA.
To Next Page
Loading...
