Anritsu MS2026C - Sense:]:VVM:cable Subsystem; Cable

[:SENSe:]:VVM:CABLe Subsystem Vector Voltmeter Commands
4-14 PN: 10580-00306 Rev. E MS20xxC PM
4-8 [:SENSe:]:VVM:CABLe Subsystem
This subsystem contains commands to select and query the VVM cable.
Cable
[:SENSe]:VVM:CABLe:SELect 1|2|3|4|5|6|7|8|9|10|11|12
Description: Selects the VVM cable. The query format of the command returns the
current VVM cable number.
Query: [:SENSe]:VVM:CABLe:SELect?
Syntax: [:SENSe]:VVM:CABLe:SELect 1|2|3|4|5|6|7|8|9|10|11|12
Cmd Parameter: <char> 1|2|3|4|5|6|7|8|9|10|11|12
Query Response: <char> 1|2|3|4|5|6|7|8|9|10|11|12
Default Value: 1
Example: To set the Cable to 6:
:SENSe:VVM:CABLe:SELect 6
Front Panel
Access: Table, Select Cable