Anritsu MS2026C - 4-10 [:Sense:]:VVM:reference Subsystem; Clear Reference; Set Reference

[:SENSe:]:VVM:REFerence Subsystem Vector Voltmeter Commands
4-16 PN: 10580-00306 Rev. E MS20xxC PM
4-10 [:SENSe:]:VVM:REFerence Subsystem
This subsystem contains commands to set and clear the reference VVM data.
Clear Reference
[:SENSe]:VVM:REFerence:CLEar
Description: No query. Clears the reference data for the current port and
measurement type.
Syntax: [:SENSe]:VVM:REFerence:CLEar
Cmd Parameter: NA
Default Value: No Reference
Example: To clear the Reference:
:SENSe:VVM:REFerence:CLEar
Front Panel
Access: CW/Table, Clear Reference
Set Reference
[:SENSe]:VVM:REFerence:MEMorize
Description: No query. Sets the reference data for the current port and measurement
type.
Syntax: [:SENSe]:VVM:REFerence:MEMorize
Cmd Parameter: NA
Default Value: No Reference
Example: To set the new Reference:
:SENSe:VVM:REFerence:MEMorize
Front Panel
Access: CW/Table, Save New Reference