Anritsu MS2026C - Distance Domain Gate Shape

:CALCulate<Tr>:FILTer[:GATE]:DISTance Subsystem VNA Commands
3-8 PN: 10580-00306 Rev. E MS20xxC PM
Distance Domain Gate Shape
:CALCulate<Tr>:FILTer[:GATE]:DISTance:SHAPe
Description: Sets the gate shape for the given trace. The query version of this
command returns the string “MAX” if the current gate shape is set to
maximum, “WIDE” if set to wide, “NORM” if set to nominal, and “MIN”
if set to minimum. Note that if gate coupling is on, then setting the gate
shape of one trace also sets the gate shape of all other traces. Also note
that setting this also sets the given trace as the active trace if it is not
already active.
Note that the command :CALC<Tr>:FILT[:GATE]:TIME:SHAP
functions the same as this command.
Syntax: :CALCulate<Tr>:FILTer[:GATE]:DISTance:SHAPe
MAXimum|WIDE|NORMal|MINimum
:CALCulate<Tr>:FILTer[:GATE]:DISTance:SHAPe?
Cmd Parameter: <char> MAXimum|WIDE|NORMal|MINimum
Query Response: <char> MAX|WIDE|NORM|MIN
Default Value: NORM
Example: To set the gate shape to Maximum for Trace 1:
:CALC:FILT:DIST:SHAP MAX
Related Command: :CALC<Tr>:FILT[:GATE]:TIME:SHAP
Front Panel
Access: Freq/Time/Dist, Gate, Gate Shape