Anritsu MS2026C - Upper Limit Fail State; Number of Upper Limit Points; Upper Limit State

:CALCulate Subsystem Spectrum Analyzer Commands
6-14 PN: 10580-00306 Rev. E MS20xxC PM
Upper Limit Fail State
:CALCulate:LIMit:UPPer:FAIL?
Description: Query whether the upper limit line has failed or not. The command
returns a 0 on success, returns a 1 on fail, and returns a 2 if the upper
limit line is OFF or the alarm is OFF.
Syntax: :CALCulate:LIMit:UPPer:FAIL?
Front Panel
Access: NA
Number of Upper Limit Points
:CALCulate:LIMit:UPPer:POINt?
Description: Returns the number of points currently in the upper limit line.
Syntax: :CALCulate:LIMit:UPPer:POINt?
Default Value: 2
Related Command: :CALCulate:LIMit:POINt?
Front Panel
Access: NA
Upper Limit State
:CALCulate:LIMit:UPPer[:STATe]
Description: Turns the upper limit line ON or OFF. It is a combination of the
commands :CALCulate:LIMit:TYPe 0;
:CALCulate:LIMit:STATe ON|OFF. The query version of the
command returns a 1 if the upper limit line is ON and returns a 0 if
OFF.
Syntax: :CALCulate:LIMit:UPPer[:STATe] OFF|ON|0|1
:CALCulate:LIMit:UPPer[:STATe]?
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <boolean> 0|1
Default Value: OFF
Example: To turn on upper limit:
:CALCulate:LIMit:UPPer ON
:CALCulate:LIMit:UPPer 1
:CALCulate:LIMit:UPPer:STATe ON