Anritsu MS2026C - Mmemory:store Subsystem; Save Screen as JPEG

All Mode Commands :MMEMory:STORe Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 8-9
8-6 :MMEMory:STORe Subsystem
The Mass MEMory STORe subsystem contains commands to transfer from the internal
memory to the mass memory device.
Save Screen as JPEG
:MMEMory:STORe:JPEG
Description: Saves the current screen measurement as a JPEG file, which is
specified by <file name> with the extension *.jpg to the current
storage location. <file name> should be enclosed in either single
quotes (‘ ’) or double quotes (“ ”) and should not contain a file extension.
Use the command :MMEMory:MSIS to set the current storage location.
Syntax: :MMEMory:STORe:JPEG <file name>
Cmd Parameter: <string> <file name>
Query Response: NA (no query)
Example: To save the screen into the file named “trace”.
:MMEMory:STORe:JPEG “trace”
Related Command: :MMEMory:DATA?
:MMEMory:MSIS:INTernal|USB
Front Panel
Access: Shift-7 (File), Save, Change Type (select JPEG from list)