Anritsu MS2026C - Gate Center Distance (Continued)

:CALCulate<Tr>:FILTer[:GATE]:DISTance Subsystem VNA Commands
3-6 PN: 10580-00306 Rev. E MS20xxC PM
Gate Center Distance (continued)
Example: To set the gate center distance for Trace 4 to 12.5 m:
:CALCulate4:FILTer:GATE:DISTance:CENTer 12500 mm
or
:CALC4:FILT:GATE:DIST:CENT 12.5
After either of these two example commands, the following query:
:CALCulate4:FILTer:GATE:DISTance:CENTer?
Returns the result: 12500
To set the gate center distance for Trace 2 to 20.5 ft:
:CALCulate2:FILTer:GATE:DISTance:CENTer 20.5 ft
The query is:
CALCulate2:FILTer:GATE:DISTance:CENTer?
Return Value: 6248.4 (in units of mm, if instrument distance unit
setting is meters)
Return Value: 20.5 (in units of ft, if instrument distance unit
setting is feet)
Related Command: :CALCulate<Tr>:FILTer[:GATE]:TIME:CENTer
:CALCulate:TRANsform:DISTance:UNIT
Front Panel
Access: Freq/Time/Dist, Gate, Center Gate