Anritsu MS2026C - Stop Frequency

[:SENSe]:FREQuency Subsystem VNA Commands
3-140 PN: 10580-00306 Rev. E MS20xxC PM
Stop Frequency
[:SENSe]:FREQuency:STOP
Description: Sets the stop frequency. Note that changing the value of the stop
frequency changes the value of coupled parameters:
Center Frequency and Span.
Syntax: [:SENSe]:FREQuency:STOP <freq>
[:SENSe]:FREQuency:STOP?
Cmd Parameter: <NRf> <freq> (hertz)
Query Response: <NR3> <freq> (hertz)
Range: 5 kHz to 20 GHz for MS2028C, MS2038C
5 kHz to 15 GHz for MS2027C, MS2037C
5 kHz to 6 GHz for MS2026C, MS2036C
Default Value: 20000000000 Hz for MS2028C, MS2038C
15000000000 Hz for MS2027C, MS2037C
6000000000 Hz for MS2026C, MS2036C
Default Unit: Hz
Example: Sets the stop frequency to 10000 Hz:
:SENSe:FREQuency:STOP 10000
Sets the stop frequency to 5 MHz:
:SENSe:FREQuency:STOP 5MHZ
Sets the stop frequency to 1 GHz:
:SENS:FREQ:STOP 1GHZ
Front Panel
Access: Freq/Time/Dist (or Freq), Stop Freq