Anritsu MS2026C - Limit Pass;Fail

VNA Commands :CALCulate:LIMit Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-23
Limit Pass/Fail
:CALCulate<Tr>:LIMit:PFMessage
Description: Enables or disables the selected trace pass fail message. <Tr> is the
trace number in the range 1 to 4. If no trace number is specified, then
the <Tr> parameter defaults to trace number 1. Setting the value to
ON or to 1 turns on the selected trace pass fail message. Setting the
value to OFF or to 0 turns off the selected trace pass fail message.
The query version of the command returns a 1 if the selected trace pass
fail message is set to ON, and the query returns a 0 if the selected trace
pass fail message is set to OFF.
Syntax: :CALCulate<Tr>:LIMit:PFMessage OFF|ON|0|1
:CALCulate<Tr>:LIMit:PFMessage?
Cmd Parameter: <boolean> OFF|ON|0|1
Query Parameter: <boolean> 0|1
Default Value: OFF or 0 (query returns 0 for OFF)
Example: To turn off pass/fail message:
:CALCulate:LIMit:PFMessage OFF
:CALCulate:LIMit:PFMessage 0
:CALC:LIM:PFM 0
To turn on pass fail message:
:CALCulate:LIMit:PFMessage ON
:CALCulate:LIMit:PFMessage 1
:CALC:LIM:PFM 1
Related Command: :CALCulate<Tr>:LIMit:PFMessage
:CALCulate:LIMit:TYPE
Front Panel
Access: Shift 6 (Limit), Pass Fail Message