Vector Voltmeter Commands :MMEMory:LOAD Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 4-5
Recall Measurement
:MMEMory:LOAD:TRACe
Description: Recalls a previously stored measurement trace from the current storage
location. The saved measurement trace that is to be loaded is specified
by <file name>. <file name> must be enclosed in either single
quotes (‘ ’) or double quotes (“ ”) and must contain a file extension of
“.mna”. Note that the trace that is specified by <file name> must
be available at the current mass storage location. The <integer>
parameter is not currently in use, but it must be sent. Send a 1. File
Extensions: “.mna”.
Syntax: :MMEMory:LOAD:TRACe <integer>,<file name>
Cmd Parameter: <integer>,<string> (1, file name)
Query Response: NA (no query)
Example: To recall trace with file name “trace”:
:MMEMory:LOAD:TRACe 1,“trace.mna”
Related Command: :MMEMory:STORe:TRACe
:MMEMory:MSIS INTernal|USB
Front Panel
Access: Shift-7 (File), Recall, Change Type (select file type from list)
To Next Page
Loading...
