Anritsu MS2026C - 3-27 [:Sense]:Frequency Subsystem; Center Frequency

[:SENSe]:FREQuency Subsystem VNA Commands
3-136 PN: 10580-00306 Rev. E MS20xxC PM
3-27 [:SENSe]:FREQuency Subsystem
Commands in this subsystem pertain to the frequency settings of the instrument.
Center Frequency
[:SENSe]:FREQuency:CENTer
Description: Sets the center frequency. Note that changing the value of the center
frequency changes the value of the coupled parameters:
Start Frequency and Stop Frequency. It may also change the
value of the span.
Syntax: [:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
Cmd Parameter: <NRf> <freq> (hertz)
Query Response: <NR3> <freq> (hertz)
Range: 5 kHz to 20 GHz for MS2028C, MS2038C
5 kHz to 15 GHz for MS2027C, MS2037C
5 kHz to 6 GHz for MS2026C, MS2036C
Default Value: 10000002500 Hz for MS2028C, MS2038C
7500002500 Hz for MS2027C, MS2037C
3000002500 Hz for MS2026C, MS2036C
Default Unit: Hz
Front Panel
Access: Freq/Time/Dist (or Freq), Center Freq