Spectrum Analyzer Commands [:SENSe] Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 6-81
Frequency Span – Full
[:SENSe]:FREQuency:SPAN:FULL
Description: Sets the frequency span to full span. Note that changing the value of the
frequency span changes the value of the coupled parameters, Start
Frequency and Stop Frequency, and may change the Center Frequency.
Syntax: [:SENSe]:FREQuency:SPAN:FULL
Query Response: NA (no query)
Default Value: 9 GHz for MS2036C
15 GHz for MS2037C
20 GHz for MS2038C
Front Panel
Access: Span, Full Span
Frequency Span – Last
[:SENSe]:FREQuency:SPAN:PREVious
Description: Sets the frequency span to the previous span value. Note that changing
the value of the frequency span changes the value of the coupled
parameters, Start Frequency and Stop Frequency, and may change the
Center Frequency.
Syntax: [:SENSe]:FREQuency:SPAN:PREVious
Query Response: NA (no query)
Range: 0 Hz and 10 Hz to 9 GHz for MS2036C
0 Hz and 10 Hz to 15 GHz for MS2037C
0 Hz and 10 Hz to 20 GHz for MS2038C
Default Unit: Hz
Front Panel
Access: Span, Last Span
To Next Page
Loading...
