Anritsu MS2026C - Calculate:pmonitor:zero Subsystem; Zero State

:CALCulate:PMONitor:ZERO Subsystem Power Monitor Commands
5-8 PN: 10580-00306 Rev. E MS20xxC PM
5-7 :CALCulate:PMONitor:ZERO Subsystem
This subsystem contains commands to turn the zero power level on/off.
Zero State
:CALCulate:PMONitor:ZERO[:STATe]
Description: Enables and disables the Zero power level. Setting the value to ON or 1
turns On the Zero power level. Setting the value to OFF or 0 turns Off
the Zero power level. The query version of the command returns a 1 if
the Zero power level is ON and returns a 0 if the Zero power level is
OFF.
Syntax: :CALCulate:PMONitor:ZERO[:STATe] OFF|ON|0|1
:CALCulate:PMONitor:ZERO[:STATe]?
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <bNR1> 0|1
Default Value: 0
Example: To turn Off the Zero power:
:CALCulate:PMONitor:ZERO:STATe OFF
:CALCulate:PMONitor:ZERO 0
To turn On the Zero power:
:CALCulate:PMONitor:ZERO:STATe ON
:CALCulate:PMONitor:ZERO 1
Front Panel
Access: Measure or Shift-4 (Measure), Zero