Anritsu MS2026C - Calculate Subsystem

:CALCulate Subsystem Power Monitor Commands
5-4 PN: 10580-00306 Rev. E MS20xxC PM
5-4 :CALCulate Subsystem
This subsystem contains commands for the power monitor mode.
Table 5-3. :CALCulate Subsystem
Keyword Parameter Data or Units
:CALCulate
:PMONitor Refer to “:CALCulate:PMONitor Subsystem” on page 5-5
:RELative Refer to “:CALCulate:PMONitor:RELative Subsystem” on page 5-7
:ZERO Refer to “:CALCulate:PMONitor:ZERO Subsystem” on page 5-8