Anritsu MS2026C - Lower Limit Next Point Left; Lower Limit Next Point Right

:CALCulate:LIMit Subsystem VNA Commands
3-26 PN: 10580-00306 Rev. E MS20xxC PM
Lower Limit Next Point Left
:CALCulate<Tr>:LIMit:LOWer:POINt:LEFT
Description: Sets the limit point to the left of the lower limit active point of the given
trace <Tr> as the new active point. <Tr> is the trace number in the
range 1 to 4. If no trace number is specified, then the <Tr> parameter
defaults to trace number 1.
Syntax: :CALCulate<Tr>:LIMit:LOWer:POINt:LEFT
Cmd Parameter: NA
Query Response: NA (no query)
Example: To make the lower limit point to the left of the current active point of
trace 2 as the new active point:
:CALCulate2:LIMit:LOWer:POINt:LEFT
Front Panel
Access: Shift 6 (Limit), Limit Edit, Next Point Left
Lower Limit Next Point Right
:CALCulate<Tr>:LIMit:LOWer:POINt:RIGHt
Description: Sets the limit point to the right of the lower limit active point of the
given trace <Tr> as the new active point. <Tr> is the trace number in
the range 1 to 4. If no trace number is specified, then the <Tr>
parameter defaults to trace number 1.
Syntax: :CALCulate<Tr>:LIMit:LOWer:POINt:RIGHt
Cmd Parameter: NA
Query Response: NA (no query)
Example: To make the lower limit point to the right of the current active point of
trace 2 as the new active point:
:CALCulate2:LIMit:LOWer:POINt:RIGHt
Front Panel
Access: Shift 6 (Limit), Limit Edit, Next Point Right