Anritsu MS2026C - Stop Frequency

Spectrum Analyzer Commands [:SENSe] Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 6-83
Stop Frequency
[:SENSe]:FREQuency:STOP
Description: Sets the stop frequency. Note that in the spectrum analyzer, changing
the value of the stop frequency changes the value of the coupled
parameters, Center Frequency and Span.
Syntax: [:SENSe]:FREQuency:STOP <freq>
[:SENSe]:FREQuency:STOP?
Cmd Parameter: <freq>
Query Response: <freq>
Range: 10 Hz to 9 GHz for MS2036C
10 Hz to 15 GHz for MS2037C
10 Hz to 20 GHz for MS2038C
Default Unit: Hz
Default Value: 9 GHz for MS2036C
15 GHz for MS2037C
20 GHz for MS2038C
Front Panel
Access: NA