VNA Commands :Display Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-85
Scale Reference Level (continued)
Default Value: Log Magnitude: 0 dB
SWR: 1
Phase: 0°
Group Delay: 0 ps
Real: 0
Imag: 0
Log Mag/2: 0 dB
Smith Chart: 10
Inverted Smith Chart: 10
Log Polar: 0 dB
Linear Polar: 1
Real Impedance: 50 ohm
Imaginary Impedance: 0 ohm
Default Unit: Current active value unit (For time, the default for setting is seconds,
but the query is always returned in nanoseconds (ns).)
Related Command: :DISPlay:WINDow:TRACe<Tr>:Y[:SCALe]:RPOSition
Front Panel
Access: Scale, Reference Value
To Next Page
Loading...
