Anritsu MS2026C - Fetch:pmonitor:relative Subsystem; Reference Power Level

:FETCh:PMONitor:RELative Subsystem Power Monitor Commands
5-10 PN: 10580-00306 Rev. E MS20xxC PM
5-9 :FETCh:PMONitor:RELative Subsystem
This subsystem contains commands to fetch the power monitor reference power level.
Reference Power Level
:FETCh:PMONitor:RELative:DATA?
Description: Fetches the reference power level data. The returned value is in dBm.
Syntax: :FETCh:PMONitor:RELative:DATA?
Cmd Parameter: NA (query only)
Query Response: <NR3> (units in dBm)
Example: To fetch the reference power level data:
:FETCh:PMONitor:RELative:DATA?
Front Panel
Access: NA