Anritsu MS2026C - Limit Fail; Lower Limit Fail State

:CALCulate:LIMit Subsystem VNA Commands
3-22 PN: 10580-00306 Rev. E MS20xxC PM
Limit Fail
:CALCulate<Tr>:LIMit:FAIL?
Description: Returns the fail status of the given trace <Tr> based on the limits. The
limit and the limit message must be ON in order to return a valid
boolean value. If either or both limits fail, then a 1 is returned.
<Tr> is the trace number in the range 1 to 4. If no trace number is
specified, then the <Tr> parameter defaults to trace number 1.
Syntax: :CALCulate<Tr>:LIMit:FAIL?
Cmd Parameter: NA (query Only)
Cmd Parameter: <NR1> <integer>
Example: To query the fail status on trace 2:
CALCulate2:LIMit:FAIL?
:CALC2:LIM:FAIL?
Related Command: :CALCulate:LIMit[:STATe]
:CALCulate<Tr>:LIMit:PFMessage
Front Panel
Access: NA
Lower Limit Fail State
:CALCulate<Tr>:LIMit:LOWer:FAIL?
Description: Returns the fail status of the given trace <Tr>. The lower limit and the
limit message must be ON in order to return a valid boolean value. If
the lower limit fails, then a 1 is returned. Otherwise, a 0 is returned.
<Tr> is the trace number in the range 1 to 4. If no trace number is
specified, then the <Tr> parameter defaults to trace number 1.
Syntax: :CALCulate<Tr>:LIMit:LOWer:FAIL?
Cmd Parameter: NA (query Only)
Query Parameter: <NR1> <integer>
Example: To query for the fail status on trace 2 for the lower limit:
:CALC2:LIM:LOW:FAIL?
:CALCulate2:LIMit:LOWer:FAIL?
Related Command: :CALCulate<Tr>:LIMit:PFMessage
:CALCulate:LIMit:TYPE
Front Panel
Access: NA