Anritsu MS2026C - GPS Antenna Voltage

[:SENSe]:GPS Subsystem All Mode Commands
8-12 PN: 10580-00306 Rev. E MS20xxC PM
Requires Option 31.
Syntax: [:SENSe]:GPS:CURRent?
Cmd Parameters: NA (query only)
Query Responses: <integer>
Front Panel
Access: Shift 8 (System), GPS, GPS Info
GPS Antenna Voltage
[:SENSe]:GPS:VOLTage
Description: Sets and Reads the voltage setting for the GPS antenna. To set the
voltage to 3.3 V, send the 0 parameter after the command. To set the
voltage to 5 V, send the 1 parameter after the command. The query
version returns 0 for an antenna voltage of 3.3 V and returns 1 for an
antenna voltage of 5 V.
Requires Option 31.
Syntax: [:SENSe]:GPS:VOLTage 0|1
[:SENSe]:GPS:VOLTage?
Cmd Parameters: <boolean> 0|1
Query Responses: <bNR1> 0|1
Front Panel
Access: Shift 8 (System), GPS, GPS Voltage
Shift 8 (System), GPS, GPS Info