Anritsu MS2026C - Trace Write State

Spectrum Analyzer Commands :TRACe Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 6-61
Trace Write State
:TRACe{1|2|3}:WRITe[:STATe]
Description: Specifies whether the designated trace state should be set to write or to
hold. TRACe1 corresponds to Trace A, TRACe2 corresponds to Trace B,
and TRACe3 corresponds to Trace C. Setting the state to ON or to 1 sets
the specified trace to write. Setting the state to OFF or to 0 sets the
specified trace to hold.
Syntax: :TRACe{1|2|3}:WRITe[:STATe] OFF|ON|0|1
:TRACe{1|2|3}:WRITe[:STATe]?
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <bNR1> 0|1
Default Value: ON for Trace A
OFF for Trace B
OFF for Trace C
Example: To set Trace A to Hold:
:TRACe:WRITe:STATe OFF
:TRACe:WRITe OFF
:TRACe:WRITe 0
To set Trace C to Write:
:TRACe3:WRITe ON
:TRACe3:WRITe:STATe ON
:TRACe3:WRITe 1
Related Command: :TRACe:DATA
Front Panel
Access: Shift-5 (Trace), Write/Hold