Anritsu MS2026C - 3-29 [:Sense]:Roscillator Subsystem; Reference Frequency Oscillator; External Reference Oscillator Frequency

[:SENSe]:ROSCillator Subsystem VNA Commands
3-142 PN: 10580-00306 Rev. E MS20xxC PM
3-29 [:SENSe]:ROSCillator Subsystem
This subsystem contains commands that allow control of the reference frequency oscillator.
Reference Frequency Oscillator
:SENSe:ROSCillator[:SOURce]
Description: Sets the reference frequency oscillator source to either INTernal or
EXTernal. The query version of this command returns the string “INT”
if the current reference oscillator source is set to internal and returns
the string “EXT” if it is currently set to external.
Syntax: :SENSe:ROSCillator[:SOURce] INTernal|EXTernal
:SENSe:ROSCillator[:SOURce]?
Cmd Parameter: <char> INTernal|EXTernal
Query Response: <char> INT|EXT
Default Value: INT
Front Panel
Access: Shift-8 (System), Application, External Reference
External Reference Oscillator Frequency
:SENSe:ROSCillator:EXTernal:FREQuency?
Description: Query for the frequency of the external reference oscillator.
Syntax: :SENSe:ROSCillator:EXTernal:FREQuency?
:SENS:ROSC:EXT:FREQ?
Cmd Parameter: NA (query only)
Query Response: <NR3> <freq> (hertz)
Default Unit: Hz
Front Panel
Access: NA