Anritsu MS2026C - DUT User Cutoff Frequency; DUT User Name

VNA Commands [:SENSe]:CORRection:CKIT:USER Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-115
DUT User Cutoff Frequency
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:WGUide:SSLT|SSST
:FCUToff
Description: Sets the DUT cutoff frequency for the specified user.
Syntax: [:SENSe]:CORRection:CKIT:USER[1]|2|3|4:WGUide:SSLT|SSST
:FCUToff <freq>
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:WGUide:SSLT|SSST
:FCUToff?
Cmd Parameter: <NRf> <freq> (hertz)
Query Response: <NR3> <freq> (hertz)
Default Unit: Hz
Range: 5 kHz to 20 GHz for MS2028C, MS2038C
5 kHz to 15 GHz for MS2027C, MS2037C
5 kHz to 6 GHz for MS2026C, MS2036C
Example: To set the DUT cutoff frequency for User 1 with calibration method
SSLT to 1 GHz:
:SENS:CORR:CKIT:USER:WGU:SSLT:FCUT 1GHz
Front Panel
Access: NA
DUT User Name
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX|WGUide
:SOLT|SSLT|SSST:NAME
Description: Sets the DUT name for the specified user.
Syntax: [:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX|WGUide
:SOLT|SSLT|SSST:NAME <string>
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX|WGUide
:SOLT|SSLT|SSST:NAME?
Cmd Parameter: <string> (no parameter data or units)
Query Response: <string> (no parameter data or units)
Example: To set the DUT name for User 1 with line type coax and calibration
method SOLT:
:SENS:CORR:CKIT:USER:COAX:SOLT:NAME “SOLT1”
Front Panel
Access: NA