Anritsu MS2026C - 6-12:Trace Subsystem; Trace Copy; Trace Exchange

Spectrum Analyzer Commands :TRACe Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 6-53
6-12 :TRACe Subsystem
This subsystem contains commands related to the transfer of trace data to and from the
instrument.
Trace Copy
:TRACe:COPY
Description: Copies Trace A to either Trace B or Trace C. Copying Trace A to
Trace B is equivalent to pressing the Shift-5 (Trace), Trace B Operations,
A→B on the front panel. This stores Trace A into Trace B and turns on
Trace B if it was off. Copying Trace A to Trace C is equivalent to
pressing the Shift-5 (Trace), Trace C Operations, A→C on the front
panel. This stores Trace A into Trace C and turns on Trace C if it was
off.
Syntax: :TRACe:COPY TRACE1,TRACE2|TRACE3
Cmd Parameter: <char> TRACE1,TRACE2|TRACE3
Query Response: NA (no query)
Example: To copy Trace A to Trace B:
:TRACe:COPY TRACE1,TRACE2
To copy Trace A to Trace C:
:TRACe:COPY TRACE1,Trace3
Front Panel
Access: NA
Trace Exchange
:TRACe:EXCHange TRACE2,TRACE3
Description: Swaps Trace B and Trace C.
Syntax: :TRACe:EXCHange TRACE2,TRACE3
Cmd Parameter: <char> TRACE2,TRACE3
Query Response: NA (no query)
Front Panel
Access: Shift-5 (Trace), Trace B Operations, B↔C
Shift-5 (Trace), Trace C Operations, B↔C