Anritsu MS2026C - Peak Threshold; Marker Data

Spectrum Analyzer Commands :CALCulate Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 6-19
Peak Threshold
:CALCulate:MARKer:PEAK:THReshold
Description: Sets the peak/valley threshold as a percentage of the display.
:CALCulate:MARKer:MAXimum:LEFT and
:CALCulate:MARKer:MAXimum:RIGHt use this value to determine
whether a particular display point qualifies as a peak.
Syntax: :CALCulate:MARKer:PEAK:THReshold <percentage>
:CALCulate:MARKer:PEAK:THReshold?
Cmd Parameter: <percentage>
Query Response: <percentage>
Range: 0% to 100%
Default Value: 10
Default Unit: %
Front Panel
Access: Marker, More Peak Options,
Peak Threshold
Marker Data
:CALCulate:MARKer:TABLe:DATA?
Description: Returns the marker table contents.
Syntax: :CALCulate:MARKer:TABLe:DATA?
Cmd Parameter: NA (query only)
Query Response: NA
Front Panel
Access: Marker, More, Marker Table On