Anritsu MS2026C - Marker Table State

:CALCulate Subsystem Spectrum Analyzer Commands
6-20 PN: 10580-00306 Rev. E MS20xxC PM
Marker Table State
:CALCulate:MARKer:TABLe[:STATe]
Description: Turns the Marker Table on or off. Setting the value to ON or 1 turns on
the marker table. Setting the value to OFF or 0 turns off the marker
table.
Note: This command cannot set the Marker Table to Large. The query,
however, returns a “1” if Marker Table is toggled to On or Large.
Syntax: :CALCulate:MARKer:TABLe[:STATe] OFF|ON|0|1
:CALCulate:MARKer:TABLe[:STATe]?
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <bNR1> 0|1
Default Value: OFF
Example: To turn on marker table:
:CALCulate:MARKer:TABLe ON
:CALCulate:MARKer:TABLe 1
Front Panel
Access: Marker, More, Marker Table