Anritsu MS2026C - Start Frequency

VNA Commands [:SENSe]:FREQuency Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 3-139
Start Frequency
[:SENSe]:FREQuency:STARt
Description: Sets the start frequency. Note that changing the value of the start
frequency also changes the value of coupled parameters:
Center Frequency and Span.
Syntax: [:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
Cmd Parameter: <NRf> <freq> (hertz)
Query Response: <NR3> <freq> (hertz)
Range: 5 kHz to 20 GHz for MS2028C, MS2038C
5 kHz to 15 GHz for MS2027C, MS2037C
5 kHz to 6 GHz for MS2026C, MS2036C
Default Value: 5000 Hz
Default Unit: Hz
Example: Sets the start frequency to 10000 HZ:
:SENSe:FREQuency:STARt 10000
Sets the start frequency to 5 MHz:
:SENSe:FREQuency:STARt 5MHZ
Sets the start frequency to 1 GHz:
:SENS:FREQ:STAR 1GHZ
Front Panel
Access: Freq/Time/Dist (or Freq), Start Freq