Anritsu MS2026C - Center Frequency; Channel Selection

Spectrum Analyzer Commands [:SENSe] Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 6-79
Center Frequency
[:SENSe]:FREQuency:CENTer
Description: Sets the center frequency. Note that changing the value of the center
frequency changes the value of the coupled parameters: Start
Frequency and Stop Frequency. It may also change the value of the
span.
Syntax: [:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
Cmd Parameter: <freq>
Query Response: <freq>
Range: 0 Hz and 10 Hz to 9 GHz for MS2036C
0 Hz and 10 Hz to 15 GHz for MS2037C
0 Hz and 10 Hz to 20 GHz for MS2038C
Default Unit: Hz
Default Value: 4.5 GHz for MS2036C
7.5 GHz for MS2037C
10 GHz for MS2038C
Front Panel
Access: Freq, Center Freq
Channel Selection
[:SENSe]:FREQuency:SIGStandard:CHANnel
Description: Sets the channel number for the selected signal standard.
Parameter: <number>
Syntax: [:SENSe]:FREQuency:SIGStandard:CHANnel <number>
[:SENSe]:FREQuency:SIGStandard:CHANnel?
Cmd Parameter: <number>
Query Response: <number>
Front Panel
Access: Freq, Channel