Anritsu MS2026C - Data

:FETCh:VVM Subsystem Vector Voltmeter Commands
4-18 PN: 10580-00306 Rev. E MS20xxC PM
Data
:FETCh:VVM:DATA?
Description: Query only. Returns the most recent VVM measurement results. Data
is returned as 2 or 4 comma-separated values depending upon the
measurement type, measurement format, measurement mode, port, and
the reference setting. A “–” is returned for any data that is not valid at
that instance.
Table 4-7. VVM Measurement Results (Sheet 1 of 2)
If Then Data Values
If the measurement type is
Insertion, and if the
measurement mode is CW,
then data is returned as
4 comma-separated values
Amplitude
Phase
Reference Amplitude
Reference Phase.
If the measurement type is
Insertion, and if the
measurement mode is CW
with save new reference set,
then data is returned as
4 comma-separated values
Relative Amplitude
Relative Phase
Reference Amplitude
Reference Phase.
If the measurement type is
Return, and if the
measurement mode is CW,
and if format is set to dB,
then data is returned as
4 comma-delimited values
Amplitude
Phase
Reference Amplitude
Reference Phase.
If the measurement type is
Return, and if the
measurement mode is CW
with save new reference set,
and if format is set to dB,
then data is returned as
4 comma-delimited values
Relative Amplitude
Relative Phase
Reference Amplitude
Reference Phase.
If the measurement type is
Return, and if format is set to
VSWR,
then data is returned as
2 comma-delimited values
VSWR
Reference VSWR.
If the measurement type is
Return, and if the
measurement mode is CW
with save new reference set,
and if format is set to VSWR,
then data is returned as
2 comma-delimited values
Relative VSWR
Reference VSWR.
If the measurement type is
Return, and if the
measurement mode is CW,
and if format is set to
Impedance,
then data is returned as
4 comma-delimited values
Real
Imaginary
Reference Real
Reference Imaginary.