General Information Sending SCPI Commands
MS20xxC PM PN: 10580-00306 Rev. E 1-9
2. Select the viWrite tab and execute the default *IDN? write by clicking the Execute
button.
3. Select the viRead tab and click the Execute button. If the PC is connected to the
MS20xxC, then the command returns the following information from the
Buffer: manufacturer name (“Anritsu”), model number/options, serial number, and
firmware package number.
Figure 1-5. VISA Interactive Control viWrite Tab
Figure 1-6. VISA Interactive Control viRead Tab
To Next Page
Loading...
