Anritsu MS2026C - Page 335

AM/FM/PM Commands :CALCulate Subsystem
MS20xxC PM PN: 10580-00306 Rev. E 7-5
:CALCulate:MARKer{1|2|3|4|5|6}:Y?
Title: Marker Read Y Value
Description: In RF spectrum view, the value is returned in dBm. In Audio Spectrum
or Audio Waveform view, the value is returned in % for AM, Hz for FM
and Radians for PM.
Default Unit: Current y-axis unit
:CALCulate:MARKer:AOFF
Title: Turn All Markers Off
Description: Turns off all markers.
Front Panel
Access: Marker, More, All Markers Off
:CALCulate:MARKer:TABLe[:STATe] OFF|ON|0|1
:CALCulate:MARKer:TABLe[:STATe]?
Title: Marker Table State
Description: Turns the Marker Table on or off. Setting the value to ON or 1 will turn
on the marker table. Setting the value to OFF or 0 will turn off the
marker table.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn on marker table:
:CALCulate:MARKer:TABLe ON
:CALCulate:MARKer:TABLe 1