IDEC WindO/I-NV4 User Manual

1 Communicating with the MICRO/I
24-2 WindO/I-NV4 User’s Manual
• Write files to an external memory device
*5
inserted in the MICRO/I.
• Read the project data downloaded to the MICRO/I and then save it to a computer.
• Delete the data stored in the internal memory or the external memory device
*5
inserted in the MICRO/I. Format
the external memory device in the MICRO/I.
*4 This is applicable for HG2J-7U and models with an audio interface only.
*5 USB flash drive inserted in USB1 for HG2J-7U, SD memory card for HG5G/4G/3G/2G-V, HG4G/3G and HG2G-5F,
USB flash drive for HG2G-5T and HG1G/1P
*6 This is applicable for models with a video interface only.
Computer
MICRO/I
Download
Recipe file
Picture file
Sound file
*4
Custom Web Page file
Movie file
*6
Movie file list
*6
USB flash drive
SD memory card
External memory device
*5
Computer
Upload
MICRO/I
Project data
• It is possible to upload recipe files, picture files, sound files
*4
and Custom Web Page files from the
External Memory Device folder in the external memory device inserted in the MICRO/I, together with
uploading of project data.
• For details on reading project data saved on an external memory device using WindO/I-NV4, refer to
Chapter 31 “Uploading” on page 31-9.
MICRO/IComputer
Delete Data
Delete Data
Format
External memory device
USB flash drive
SD memory card

IDEC WindO/I-NV4 Specifications

General

Brand	IDEC
Model	WindO/I-NV4
Category	Organizer
Language	English