WindO/I-NV4 User’s Manual 24-9
1 Communicating with the MICRO/I
24
Online Function
Search MICRO/I dialog box
The result of the search performed by clicking Search in the Target List dialog box is displayed.
â– (Results List)
Displays the information of MICRO/I as search results. Selects the MICRO/I to register in the Target List on the
Target List dialog box.
â– Re-search
Search again for MICRO/I on the same network that can be connected to a computer via maintenance
communication.
â– Select
Closes the Search MICRO/I dialog box, and then registers the MICRO/I selected from the (Results List).
â– Close
Closes the Search MICRO/I dialog box.
(Results List)
IP Address: Displays the IP address of the MICRO/I.
MAC Address: Displays the MAC address of the MICRO/I.
Type Number: Displays the part number of the MICRO/I.
Port Number: Displays the port number of the MICRO/I.
If there is a MICRO/I of the IP address already registered in the Target List on the Target List dialog box,
an overwrite confirmation message is displayed.
• Click Yes to overwrite and save the MICRO/I of the IP address displayed in the confirmation message.
• Click Yes To All to overwrite and save the MICRO/Is of all IP addresses.
• Click No to display the next confirmation message without overwriting the MICRO/I of the IP address
displayed in the confirmation message.
• Click Cancel to stop importing the MICRO/I of the IP address.
To Next Page
Loading...
General