3 Simulator
26-8 WindO/I-NV4 User’s Manual
■ (Specified Screen)
Switches to the Base Screen with the specified number.
■ (Next Screen)
Switches to the screen with screen number one higher than the Base Screen currently displayed. If the screen
numbers are not consecutive, switches to the screen of next highest number.
■ (Last Screen)
Switches to the Base Screen of highest screen number in the project data.
■ Script Debugger
Check the operation of the script used in the project. For details, refer to“3.5 Script Debugger” on page 26-15.
■ Reload project data
Reloads the edited project data.
■ Settings
Click this button to display the Simulator Settings dialog box. For details, refer to “Simulator Settings Dialog Box” on
page 26-9.
■ Function key
*1
Check the operation of the switches (F1 to F12) on both sides of the screen of the HG1P main unit.
Right-click the function key and select the action mode for the switch from "Momentary" or "Alternate".
*1 HG1P only
Function key
Function key
To Next Page
Loading...
General