WindO/I-NV4 User’s Manual 10-11
1 Numerical Input
10
Data Displays
● Format Tab
■ Font
Selects the font used for displaying text from the following.
Western
*1
, Standard
*2
, Stroke
*2
, 7-Segment, Windows
The characters that can be displayed depend on the font. For details, refer to Chapter 2 “1.2 Available Text” on page 2-6.
■ Size
Specifies the text size to be displayed. The fonts and sizes that can be set vary based on the model.
■ Style
*2
Selects Regular or Bold for text style.
Can only be set when Standard is selected for Font.
■ Magnification
*2
Can only be set when Standard is selected for Font.
■ Align Text
Selects the text alignment in the horizontal direction from the following.
Left, Center, Right
For details, refer to Appendix “5 Text Alignment” on page A-7.
■ Text Color
Selects the color of displayed text (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
This option can configure the text color in display mode and in entry mode. However, for Entry Mode text color can
be set only when the Reverse check box is cleared.
*1 HG2J-7U only
*2 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P only
Model Font Size
HG2J-7U Western, 7-Segment 8 to 512
HG5G/4G/3G/2G-V, HG4G/3G,
HG2G-5F/-5T, HG1G/1P
Standard 8x16, 16x16
Stroke, 7-Segment 8 to 128
W, H: Selects text magnification (0.5, 1 to 8).
To Next Page
Loading...
General